Medical gas outlets

Gas Outlets OR Range

The terminal units of a medical gas pipeline system are devices used to make connections and disconnections in order to provide specific medical gases to medical devices, pulmonary ventilators or other appliances. An incorrect connection puts to
hazard the life of patients, therefore the terminal units have been designed following different technical standards so to grant a non-interchangeability among different gases and prevent from any possible mistake. The OR range socket can be fixed to the base block in only one position. The profile of the installed socket is always in the correct position.

The socket is the female part of the terminal unit connected to the base block by a gas specific interface and which contains the gasspecific connecting point.

These sockets have been designed in accordance with the following standards:
BS 5682:1998, DIN 13260-2, NF S 90-116, FD S 90-119, SS 875 24 30, JIS T 7101, AS 2896 and ENV 737-6 for the dimensions of linking point to the probe;
EN ISO 9170-1 for design and manufacture requirements.

Materials:
Brass EN 12164 – CuZn39Pb3 nickel plated
EPDM-PEROX
AISI
ABS/POM

Gas Outlets UNI 9507

The terminal units of a medical gas pipeline system are devices used to make connections and disconnections in order to provide specific medical gases to medical devices, pulmonary ventilators or other appliances. An incorrect connection puts to
hazard the life of patients, therefore the terminal units have been designed following different technical standards that ensure the accordance to the European directive 93/42/EEC so to grant a non-interchangeability among different gases and prevent from any possible mistake.

This component is the part of the terminal unit connected to the medical gas pipeline distribution system (suction in case of vacuum). The base blocks are designed in accordance with the standard EN ISO 9170-1 for design and manufacture requirements. All base blocks, except those for vacuum, are supplied with a maintenance valve to be fitted after the plumbing is completed.

Materials:
Brass EN 12164 – CuZn39Pb3
EPDM-PEROX
AISI

Sockets UNI 9507

The socket is the female part of the terminal unit connected to the base block by a gas specific interface and which contains the gasspecific connecting point. These sockets have been designed in accordance with the following standards:
UNI 9507;
EN ISO 9170-1 for design and manufacture requirements.

Materials:
Brass EN 12164 – CuZn39Pb3 nickel plated
EPDM-PEROX
AISI
ABS/POM

Range of male and female components intended to maintain gas-specificity by allocation of a set of different diameters and screw thread to mating components
to each gas. These connectors are suitable for medical gases when the pressure range is 300 kPa – 1400 kPa and for vacuum when the pressure range is 10 kPa – 100 kPa. These components are designed in accordance with the standard EN 15908.

Materials:
Brass EN 12164 – CuZn39Pb3 nickel plated
EPDM-PEROX
AISI

Anaesthetic Gas Scavenging System (AGSS) and Air Motor

They are the part of system to which the operator makes connection and disconnection for exhausting the medical gases coming from anaesthetic and breathing systems. To grant the gas-specifity and prevent any mistake.

EN ISO 9170-2 AGSS Sockets

These are the female parts of a terminal unit attached to the base block by a gas-specific interface which contain the gas-specific connection point.

Materials:
Brass EN 12164 – CuZn39Pb3
Aluminium series 2000 or 6000
Steel
EPDM-PEROX
AISI
PA/POM

EN ISO 91790-2 AGSS Probes

These are the male non-interchangeable parts to be connected to the outlets.

Materials:
Aluminium series 2000 or 6000 anodized
AISI
PA/POM

Air Motor ENV 73

This terminal unit integrates a medical tool drive outlet with a gas scavenging terminal unit.

Materials:
Brass EN 12164 – CuZn39Pb3 nickel plated
Steel
EPDM-PEROX
Anodized Aluminium

Materials:

• Brass EN 12164 – CuZn39Pb3
• NBR/EPDM
• AISI
• ABS/POM
• Aluminium